Example for the applying of rear boot spoiler.
The fitting must be done by professionals.
It is recommended to be made installation before the painting.
1. Put the spoiler on the place where it should be applied . Prе-fit the spoiler if it is necessary. Hold or glue the spoiler on the right place with paper tape and open the boot.
2. Drill both the boot and the spoiler with 3 mm. drill
3. Remove the spoiler and drill just the boot with 5mm. drill
4.Screw the screws in to the spoiler so they can create a carving and make the finale installation easier.
5. Apply silicone around the hole.
6. Apply the spoiler over the boot and screw the screws.
